DIY Button Picture Frame - A Joyful Gift for Valentine's Day

For a while, we've been thinking of a cute project in which we can apply the million and one spare buttons we accept laying around, so let's create a button flick frame! Only in time for Valentine'due south Day, yous can tell your loved one that they're cute as a button and offer them a frame for your favorite photo!

The whole project is pretty like shooting fish in a barrel to exercise and it won't even have y'all that long to practice. However, it'due south going to be a creation that will remind your Valentine that yous dear them every fourth dimension they see your gift.

Materials for a button film frame

• photo frame
• buttons
• yellowish acrylic paint
• paintbrush
• scissors
• mucilage gun
• lace ribbon

How to make a button picture frame

As soon as you've gathered upwardly your materials, we can begin. Even so, a few words before we begin. We chose to get with a yellowish paint and buttons in similar shades, ranging from calorie-free yellowish to dark orange. Depending on what you take at habitation, you tin can go for different color palettes of grade.

Step 1: Paint the motion picture frame

We're going to start our project by painting our photo frame. We chose to go with a frame that is fabricated out of cardboard, and so it's pretty easy to paint over. Even if y'all choose ane that'due south made of woods, this project will work simply equally fine. Acrylic paint works on pretty much any surface and it also dries up pretty fast.

So, get theyellowish acrylic pigmentand yourpaintbrush and outset painting the frame. Ours has a congenital-in plastic window, but if you can take yours out while painting, that would be peachy – y'all don't want to paint over it.

Cover the whole frame with the yellowish paint and try to spread the color evenly.

If you feel like the frame needs more than color, allow it to dry for a few minutes and then offset calculation in more pigment so you become a better shade.

Step 2: Create your design

Next, yous want to commencement getting your buttons and placing them over ii of the sides of the flick frame. Add together a few larger pieces on the corner, then fill in the infinite with smaller ones.

Mix in the shades and sizes, giving the pattern a lot of personality.

Place buttons on both sides, making sure to add a pop of color here and in that location.

Pace 3: Mucilage the buttons

Now that you know where yourbuttonsare going to go, become the glue gun and start picking up the buttons one by one. Put some hot glue to the dorsum of the button and place information technology back on the picture frame. Make sure you printing them slightly then you're sure the two pieces are set.

For some of the smaller pieces, you may want to try adding the hot gum directly to the picture frame and so placing the button over it, so you don't get hot mucilage over your fingers.

Go along calculation the buttons to the design and make sure they're all glued downward. Work methodically and then you don't lose runway of which push is secured and which ones are free.

You tin let some of the buttons to go over the frame a fleck, but make certain the glue you added to its back doesn't encompass the entire surface, equally  you'll end upward with hot gum on the screen of your photo frame.

Make certain the buttons do not cover the whole top and left sides. Let some space there for the final design elements.

Footstep 4: Add the ribbon

At present that your buttons are all glued to the frame, it'due south fourth dimension we move to the next step – adding the lace ribbon. Go the ribbon and place information technology over the side of the frame, measuring out how much of it you need.

Cut the lace once you've measured it, and brand sure it will cover the entire length.

Get thegum gunand apply some hot glue to the area where you want to start applying the lace ribbon. Place the ribbon over it and press.

Keep adding hot glue and laying down the lace ribbon as yous go.

If you're confident in your power to describe a straight line, apply glue over the whole length. Otherwise, go inch past inch.

Press the lace straight over the hot glue and straighten it out so at that place are no lumps and bumps.

And so, go to the concluding picture frame surface area that has no ornament – the bottom side. Measure out the same distance from the frame as you did on the right side and use some hot gum. Add the lace ribbon over the hot glue.

Keep going, gradually adding hot glue and the ribbon over it.

In that location yous go, just a little more left to go. Secure the lace over the mucilage straighten out the material.

Step 5: Add finishing touches

You're about done! Become yourscissorsand trim out any excess lace ribbon on the sides. You want the design to wait great.

Get another colorful push button and add some hot glue to its back.

Identify the button on the spot where the lace ribbons overlap.

You're done! Look what a pretty creation! This will certainly remind your loved ones of you whenever they encounter information technology, especially since it will also be the home of a beautiful moving picture.

Nosotros loved how cheerful the photo frame looks. It's going to be a perfect souvenir, even for Valentine's Day, particularly since it's handmade and you lot can include a picture show of you two together.

The pattern permits a lot of customization, and then make sure y'all practice just that – go far your own. You tin go for a different paint color, and choose similarly colored buttons. Too, you can go for a different blazon of ribbon at that place.

crosswhitepronow1963.blogspot.com

Source: https://www.diys.com/button-picture-frame/

Share this post